Equalizer BD1 for Conventional Equalizer
D to C High Speed Operation, 2T Exclusion to Jitter Measurement
Measurement Range: 0 to 20%, 0 to 20%TNS (T Clock Cycle)
Input: RF Input
Maximum Pulse Width: 10ns
Input Voltage: 0.1Vp-p to 5Vp-p

*Frequency Range: 20Hz to 100KHz
*Input Level: 50mV to 300V
*Measurement Ratio: 0.001% to 100%
*Input Impedance: 100K ohms UNBAL/BAL
*Output Impedance:
 600 Ohms/50 Ohms UNBAL/BAL
*30KHz, 80KHz, LPF
*GP-IB I/F

*Frequency Range: 20Hz to 100KHz
*Input Level: 50mV to 300V
*Strain Measurement: 0.001% to 100% 
*Input Impedance: 100K Ohms UNBAL/BAL
*Output Impedance:
 600 Ohms/50 Ohms UNBAL/BAL
*30ＫＨｚ, 80KHz, LPF GP-IB I/F 

Voltage Measurement Range: 30uV to 100V Full Scale,
14Range (Digital and Analog)
Distortion Measurement: 0.003% to 30% Full Scale, 9 Range
(Analog and Digital)
Frequency Range: 5Hz to 110KHz
Filter: 400Hz HPF, 30KHz LPF, 100KHz LPF
Analysis Mode Measurement: From second to
fifth order Total harmonic distortion can be measured

Shibasoku

AG16B

Oscillation Frequency Range: 10Hz to 110KHz
MAX Output Level: 5VRMS (600 OhmsLOAD)
Output ATT 0-99dB
Distortion Rate: 0.0005% (1KHz)

*600 ohms Balance Input and Output
*0.1dB Stepx10
*1dB Stepx10
*10dB Stepx5
*60dB Stepx1
*Maximum Attenuation: 121dB

*600 ohms Balance Input and Output
*0.1dB Stepx10
*1dB Stepx10
*10dB Stepx5
*60dB Stepx1
*Maximum Attenuation: 121dB

*Sampling Frequency: 96KHz, 48KHz, 44.1KHz, 32KHz
*Bit Rate: 24bit 2CH, 16bit 2CH
*Test Pattern: Sine and Square wavepatterns
*Maximum Test Pattern: 100Types
*OPT Level Adjustment (Z1 Specification)

*Sampling Frequency: 96KHz, 48KHz, 44.1KHz, 32KHz
*Bit Rate: 24bit 2CH, 16bit 2CH
*Test Pattern: Sine and Square wavepatterns
*Maximum Test Pattern: 100Types
*OPT Level Adjustment (Z1 Specification)

Input: Balanced Input (CANNON) Unbalanced Input (BNC Optical
Input (CNF50SR3)
Output Level: 2Vrms (60 ohms Terminal Time)
Sampling Frequency Measurement: fs 32K, 44.056K, 44.1K, 48K) Hz
Monitor Output: 2CH, LCH, RCH
with GPIB

DARC (FM Encoder)
*Output Level: 0 to 0.999Vp-p
                    1 to 9.99Vp-p
*Output Impedance: 75 Ohms
*DARC generates L-MSK Signal
*with RS232C I/F, GP-IB I/F

DARC (FM Encoder) 
*Output Level: 0Vp-p to 0.999Vp-p
                    1Vp-p to 9.99Vp-p
*Output Impedance: 75 ohms
*Generates L-MSK signals
 corresponding to the DARC System.
*with RS232C I/F, with GP-IB I/F

*Frequency Range: 5Hz to 159.9KHz
*Input Level: 0.3 to 100Vrms
*Distortion Measurement Range:
 0.003 percent to 100 percent
*Input Impedance: 100K ohms

*Frequency Range: 5Hz to 110KHz
*Input Level: 0.316mV to 100V
*Modulation Range: 31.6%FS to 0.01%FS
*with GP-IB

*Frequency Range: 5Hz to 110KHz
*Input Level: 0.316mV to 100V
*Distortion Measurement Range:
 31.6% to 0.01% FS
*with GP-IB

*Frequency Range: 5Hz to 110KHz
*Input Level: 0.136mV to 100V
*Strain Measurement: 31.6% to 0.01%FS
*with GP-IB