*4CH Output
*Low Range: 0V to 20V, 0A to 2A 
*High Range: 0V to 50V, 0A to 0.8A

*Output Voltage: 0V to 20V
*Output Current: 0A to 2A
*GP-IB, RS232 I/F
*Input: AC100V 50/60Hz (OP100)

*Power System 
*Single Output:
 100W to 0 to 20V, 0 to 5A
*with GP-IB

*System Power Supply
*Single Output:
 100W 0V to 20V, 0A to 5A
*with GP-IB

*System Power Supply
*Single Output:
 100W 0V to 20V, 0A to 5A
*with GP-IB

*System DC Power Supply 
*Single Output: 100W,
 0V to 20V, 0A to 5A 
*with GP-IB

*Output Voltage: 0V to 60V
*Output Current: 0A to 100A
*Input 180V to 250V Three Phase
*Digital Display: with Overvoltage,
 Overtemperature,
 Overcurrent Protection

*Maximum Input and Output Voltage
  45Vrms (20Hz to 1Mhz) Resistance 50 ohms
 +/-65V (130Vp-p) DC to 1MHz  (Resistance 100 Ohms)
*Maximum Output Current
 1Arms 40Hz to 1MHz
 +/-0.75A DC to 40Hz
*Bias: +/-50V
*Preamplifier Gain:
 x10, x20, x50, x100 and x10 to x300 
 variable continuosly
*Input2CH: (A, B) BNC Connector,
 Output BNC Connector, 
 Monitor Output 1/100 BNC Connector

*Maximum Output Voltage
 45Vrms or less 20Hz to 1MHz (Resistance 50Ω Load)
 +/-65V (130Vp-p) DC to 1MHz (Resistance 100Ω Load)
*Maximum Output Current
 1Arms 40Hz to 1MHz
 +/-0.75A DC to 40Hz
*Bias: +/-50V
*Preamp Width Rate Increase:
 x10, x20, x50, x100 and x10 to x300 Variable
*Input 2CH (A, B) BNC Connector,
 Output BNC Connector,
 Monitor Output 1/100 BNC Connector 

*Digital Display
*Output Voltage: 0V to 10V
*Output Current: 0A to 3A
*Input: AC100V

*Digital Display 
*Output Voltage:  0V to 10V
*Output Current: 0A to 3A
*Input: AC100V

*Digital Display
*Output Voltage: 0V to 10V
*Output Current: 0A to 5A
*with Remote Sensing

*Digital Display
*Output Voltage: 0V to 10V
*Output Current: 0A to 5A
*with Remote Sensing

*Digital Display
*Output Voltage: 0V to 36V
*Output Current: 0A to 2A
*Input: AC100V

*Digital Display
*Output: 0V to 36V, 0A to 2A
*Input: AC100V

*Digital Display
*Output: 0V to 36V, 0A to 2A
*Input: AC100V

*Digital Display
*Output Voltage: 0V to 36V
*Output Current: 0A to 2A
*with Remote Sensing

*Digital Display
*Output Voltage: 0V to 16V 
*Output Current: 0A to 3A 
*Input: AC100V

*Digital Display
*Output Voltage: 0V  to 35V
*Output Current: 0A to 5A

*Digital Display
*Output Voltage: 0V to 35V
*Output Current: 0A to 5A

*Output Voltage: 0V to 36V
  Setting Resolution:  1mV
*Output Current: 0A to 3A
  Setting Resolution:
   1mA (1mA Range)/0.1mA (0.1mA Range)
*Electronic Load Voltage:
  Input Voltage: 0.6V to 36V
  Input Current: 0A to 3A
  (Constant Current Electric Discharge) 
*Protection Function (OVP, OCP, OHP)

*Digital Display
*Output Voltage: 0V to 20V
*Output Current: 0A to 18A
*Power Input: 100V to 240V, 47Hz to 63Hz
*with Overvoltage, Overtemperature,
 Overcurrent Protection

*Digital Display
*Output Voltage: 0V to 40V
*Output Current: 0A to 9A 
*Power Input: 100V to 240V, 47Hz to 63Hz
*with Overvoltage, Overcurrent,
  Overcurrent Protection

*Output Voltage: -20V to +20V
*Output Current: 20A
*Frequency Characteristics:
 DC to 30KHz (at Constant Voltage)
*Rapid Sequence Function,
 Measurement Display Function, 
 Power Booster Function, 
 Analog Remote Coontrol Function

*Output Voltage:  -20V to +20V
*Output Current: 20A 
*Frequency Properties:
 DC to 30KHz (at constant voltage) 
*High-speed Sequence Function,
 Measurement Indication Function, 
 Power Booster Function, 
 Analog Remote Control Function

*Output Voltage: -40V to +40V
*Output Current: 10A
*Frequency Characteristics:
 DC to 30KHz (at constant Voltage)
*Fast-Sequence Function,
 Measurement Display Function, 
 Remote Control Function

*Output: 1KVA
*Output Frequency: 1Hz to 999.9Hz
*Output Voltage:
 1V to 150V 2V to 300VPressure
*Output Current:
  10A (Low Range: 100V Output)
  5A (High Range 200V Output)
*Input Voltage: AC85V to 132V/170V to 250V

PAD-L, PAN, PAL, PAB-A Series for Power Supply Control
*2 Power Supplies can be controlled
*Talker/Listener Function, Sequence Operation Function, and Calibration Function

*Digital Control for
 Power Supply Controller
*Output TP-BUS Connector
*PMR Series, PWR Series compatible 
*GP-IB/RS232C
*ROM Version: Ver2.20

4CH Output
*Output 1: 0V to +25V, 0A to 3A
*Output 2: 0V to 6V, 0A to 2A
*Output 3: 0V to -16V, 0A to 1A
*Output 4: 0V to +16V, 0A to 1A
  Output 1 and Output2 are common   
  Output 3 and Output 4 are common
*Input: AC 100V

*Analog Meter 
*Output: 0V to 18V, 0A to 1.2A

*Input Voltage: AC240V +/-10% 1 Phase or 3 Phase 47 to 63Hz
*Output Voltage: 0 to 30V
*Output Current: 0 to 65A
*Over Voltage Protection Function: (OVP)
*Over Current Protection Function: (OCP)

*Power:
 AC85 to 265V (Single Phase 47 to 63Hz)
*Output Voltage: 0V to 20V
*Output Current: 0A to 38A
*Overvoltage Protection, Overtemperature Protection,

*Output Voltage: 0V to 60V
*Output Current: 0A to 100A 
*Input: Three-phase 200V to 220V 50/60Hz
*Digital Display 
*with Overvoltage Protection,
 Overcurrent Protection etal.

*Digital Display 
*2 Power Output:
 0V to 18V  0A to 3A,
 0V to -18V 0A to 3A (COM compatible)

*2Output:
 0V to +36V 1.5A, 0V to +36V 1.5A
 (COM Compatible)
*Input: AC100V 50/60Hz
*Digital Display

*3Output: 0V to 18V 1.5A,
 0V to 8V 3A, 0V to +8V 3A
*Input: AC100V 50/60Hz
*Digital Display

*3Output: 0V to 18V 1.5A,
 00V to 8V 3A, oV to +8V 3A
*Input: AC100V 50/60Hz
*Digital Display

*Output Waveform:
 Damped Oscillatory Wave, Frequency 1MHz
*Output Voltage: 1000V to 3000V
*Repition Frequency: 400Hz
*Duration Time:
 1sec to 10sec, Coupling Condenser: 0.5uF
*Can test IEEESTD-472
 (ANSIC37.9a) and JIS-C4602 applicable.

Automatic Withstanding Voltage and
 Insulation Resistance Tester 
*Voltage: AC0.2 to 5KV (Output 200VA)
*Insulation: DC50 to 1000V
*Measuring Range: 1 to 9999M Ohms

*Digital Display
*Output Voltage: 0V to 18V
*Output Current: 0A to 3A
*Input: AC100V

*Digital Display 
*Output Voltage: 0V to 18V 
*Output Current: 0A to 3A
*Input: AC100V

*Digital Display
*Output Voltage: 0V to 18V
*Output Current: 0A to 3A
*Input: AC100V

*Digital Display
*Output Voltage: 0V to 35V
*Output Current: 0A to 2A
*Input: AC100V